AWLCRAFT CS - AWLGRIP
Two-component matt/satin/semi-gloss varnishes
NEW Two-component matte clear varnish, offering an exceptional matte, satin or semi-gloss finish for the yacht market.
Specially designed for use on small and large surfaces.
- Provides a smooth, hard, durable finish with good scratch resistance.
- The assortment comprises 2 bases: matte and semi-gloss, which can be mixed to obtain a variety of gloss levels.
→The following finishes can be achieved:
Matt: 0-15 gloss units at 60°: use 100 parts 0J0300.
Satin: 16-30 gloss units at 60°: use 60 parts 0J0300 & 40 parts 0J0301.
Semi-gloss: 31-60 gloss units at 60°: use 30 parts 0J0300 & 70 parts 0J0301.
Gloss: 61-85 gloss units at 60°: use 100 parts 0J0301.
Whether your boat requires a matte, satin or semi-gloss finish, Awlcraft CS gets the job done. Designed to complement the full range of colors and effects Awlcraft SE. It can also be applied to Awlcraft 2000 & Awlcraft 3000.
Awlcraft CS is the perfect solution for finishing in all gloss levels.
BASE :
AWLCRAFT CS LOW GLOSS BASE GALLON ..... 000J0300GF
AWLCRAFT CS MEDIUM GLOSS BASE GALLON ..... 000J0301GF
MIXING RATIO 100 : 40 : 60 by volume (Base : Converter : Thinner)
CONVERTER :
AWLCRAFT CS CURING SOLUTION GALLON ..... 00J0010GF
DILUENT :
STANDARD THINNER T0003 QUART ..... 000T0003Q
STANDARD THINNER T0003 5L ..... 000T0003LT
SOLVENTS :
RAPID THINNER T0001 5L ..... 000T0001LT
VERY FAST THINNER T0002 5L ..... 000T0002LT
STANDARD THINNER T0003 QUART ..... 000T0003Q
STANDARD THINNER T0003 5L ..... 000T0003LT
